Life original paper products factory site assessment
requirements
1. Responsibility
Factory should be provided with the original ecological evaluation about the responsibilities of all kinds of personnel and mutual relationship, and the factory should be specified in the organization a has the ability of fully competent for ecological evaluation of top management, no matter how the members in other aspects of the duty, should have the responsibility and authority of the following aspects:
A) is responsible for establishing ecological evaluation system that could satisfy the requirement of this document, and ensure its implementation and maintain;
B) ensure that labeled with original product label products accord with the requirement of ecological evaluation standard;
C) establish a documented procedure to ensure that the original ecological product label safekeeping and use, and ensure that nonconforming product is not labeled with the tag.
2 files
The factory shall establish and maintain documented procedures to this file requires effective control of documents and materials.These controls should ensure that:
Prior to the release of a) and the change should be approved by the authorized person, to ensure its suitability;
B) file changes and revision status is identified, prevent invalid file of unintended use;
C) to ensure the effective at using can obtain corresponding document version.
D) documents and data shall be clear and complete as evidence of a product conform to specified requirements.
The factory shall establish and maintain the corresponding file data file.File content should include at least evaluation certificate, test report, factory site assessment report.
3. Purchasing
3.1 the factory shall establish a purchasing renewable raw materials such as wood of documented procedures, to track and verify its legitimate sources.
3.2 the factory should record all the source of the native fiber, and ensure that all raw materials such as wood is from a legal way.Raw materials such as wood should not be from protected areas or going to be the reserve area, forest and defined by the national stakeholders Gao Baocun value of forest, unless the purchase clearly in line with national protection of the laws and regulations.
3.3 any native fiber such as come from renewable forest management, must be certified by a third party.
4. The production process control
Pulp production including from fiber raw materials entering the factory this moment, to the pulp from pulp mill check all process part, for the moment, while the paper production process contains from beating to paper curl to roll all the process.Do not include the pulp, paper, or transportation and transformation of raw materials and packaging.
4.1 the factory shall ensure that emissions of pollutants into the air and water conform to the requirements of the relevant laws and regulations, these pollutants including chemical oxygen demand (COD), phosphorus (P), nitrogen oxide (NOx), sulfur (S, S) of the oil and coal, etc.
4.2 the factory shall ensure that the pulp production release of the adsorption of organic halide (AOX) weighted average no more than 0.12 kg/ADT paper.The paper used in each of the pulp AOX emissions cannot be more than 0.25 kg/ADT pulp.
Only for the use of chlorine bleached pulp production process detection of AOX.In the integrated paper production waste water or without bleaching pulping and you do not need to test the index of chlorine bleaching.
Note: the ADT said air dry basis.
4.3 factory measures should be taken to control the CO2 emissions, including pulp and paper production process of all non renewable fuel sources, including production electric discharge (whether in the factory of spontaneous electric or power grid electricity).
Should use the following to calculate the emission factor of CO2 emissions from fuel:
1. Responsibility
Factory should be provided with the original ecological evaluation about the responsibilities of all kinds of personnel and mutual relationship, and the factory should be specified in the organization a has the ability of fully competent for ecological evaluation of top management, no matter how the members in other aspects of the duty, should have the responsibility and authority of the following aspects:
A) is responsible for establishing ecological evaluation system that could satisfy the requirement of this document, and ensure its implementation and maintain;
B) ensure that labeled with original product label products accord with the requirement of ecological evaluation standard;
C) establish a documented procedure to ensure that the original ecological product label safekeeping and use, and ensure that nonconforming product is not labeled with the tag.
2 files
The factory shall establish and maintain documented procedures to this file requires effective control of documents and materials.These controls should ensure that:
Prior to the release of a) and the change should be approved by the authorized person, to ensure its suitability;
B) file changes and revision status is identified, prevent invalid file of unintended use;
C) to ensure the effective at using can obtain corresponding document version.
D) documents and data shall be clear and complete as evidence of a product conform to specified requirements.
The factory shall establish and maintain the corresponding file data file.File content should include at least evaluation certificate, test report, factory site assessment report.
3. Purchasing
3.1 the factory shall establish a purchasing renewable raw materials such as wood of documented procedures, to track and verify its legitimate sources.
3.2 the factory should record all the source of the native fiber, and ensure that all raw materials such as wood is from a legal way.Raw materials such as wood should not be from protected areas or going to be the reserve area, forest and defined by the national stakeholders Gao Baocun value of forest, unless the purchase clearly in line with national protection of the laws and regulations.
3.3 any native fiber such as come from renewable forest management, must be certified by a third party.
4. The production process control
Pulp production including from fiber raw materials entering the factory this moment, to the pulp from pulp mill check all process part, for the moment, while the paper production process contains from beating to paper curl to roll all the process.Do not include the pulp, paper, or transportation and transformation of raw materials and packaging.
4.1 the factory shall ensure that emissions of pollutants into the air and water conform to the requirements of the relevant laws and regulations, these pollutants including chemical oxygen demand (COD), phosphorus (P), nitrogen oxide (NOx), sulfur (S, S) of the oil and coal, etc.
4.2 the factory shall ensure that the pulp production release of the adsorption of organic halide (AOX) weighted average no more than 0.12 kg/ADT paper.The paper used in each of the pulp AOX emissions cannot be more than 0.25 kg/ADT pulp.
Only for the use of chlorine bleached pulp production process detection of AOX.In the integrated paper production waste water or without bleaching pulping and you do not need to test the index of chlorine bleaching.
Note: the ADT said air dry basis.
4.3 factory measures should be taken to control the CO2 emissions, including pulp and paper production process of all non renewable fuel sources, including production electric discharge (whether in the factory of spontaneous electric or power grid electricity).
Should use the following to calculate the emission factor of CO2 emissions from fuel:
没有评论:
发表评论